UPVC Replacement Door Handles
The handles on your doors wear out over time and will need to be replaced. In this case, it is essential that the new handles match the dimensions of the old handle.
The three measurements to be inspected are the top screw's position as well as the key hole and lever sizes. Refer to the size guide for help with this.
Inline Lever/Lever
A lever handle or lever is a modern-day door handle designed to suit new or replacement doors. This kind of door handle is available in a variety of designs and finishes. This handle is offered by several manufacturers including Avocet ERA Fullex Hoppe Mila Millenco Yale.
Fab and Fix Windsor Inline Sprung Lever Door Handle
The handles made of uPVC/Composite are made from robust materials, and are perfect for multi-point lock doors that require a strong design. The handles are inline and work off the same spindle and screw fixings, so they can be easily incorporated into doors made of uPVC/Composite, either new or old.
The spring lever design allows the handle to be positioned and angled for comfortable operation and is suitable for all users. The handle has been endurance-tested to 200,000 cycles. This helps ensure that the finish is of high quality and performance is maintained over time. window handles that springs is adjustable to accommodate a wide range of locks. This is particularly useful in doors that are narrower, where the cylinder is further away from the door. A shortened lever can also be used on doors with a latch that can be activated with the thumb located on the inside.
Lever Pad
A Lever Pad upvc door handle operates differently than lever handles on doors. These handles are operated by one spindle or two spindles, either inline or offset. They are usually employed on UPVC double glazed doors and come in many variations & styles.
The handles are available in a variety of finishes including White Chrome and Gold. The finish is BS EN 1670 Grade 5 and is resistant to rust. This gives the handle an outstanding performance and durability to serve its intended use.
All UPVC lever pads for handles include a spindle and screws, and can be fitted on the uPVC door. The backplate fixation centres of 211mm allow for a bigger handle, which is usually an advantage when replacing a damaged or old multi-point door lock mechanism. These handle levers have springs, which eliminate the problem of door handles that sag out of their horizontal position when they are not being used.
It is crucial to match the dimensions of the PZ for both the multipoint lock and the uPVC doors when selecting a replacement UPVC spindle and handle. This measurement may also be referred to as 'handle centres or cylinder centre'. It is important to match the right handles.
When you have the right PZ size, you'll need to ensure that the handle lever pads and push pads are in a suitable shape for the American with Disabilities Act (ADA) approved handles you need for your doors. These are typically round or square with an internal lever and an external push pad.
The majority of the UPVC Lever Pads that we offer are sprung. This means that they can be reverted to a horizontal position after they are not in use instead of hanging, and possibly securing to the frame. This prevents drafts and cold air from entering a property. It is also the case that the majority of UPVC handle lever pad style handles are swivel, allowing you to install them on either side of the door.
Euro Cylinder
Cylinder locks are usually used on uPVC doors, but they can be utilized on other types of doors. They work by using a key to unlock a cylinder case that is then revealed with pins that can be aligned to those in the lock body and allowing them to turn a revolving cam, thus opening the door. Euro cylinders are available with up to six pins. External and internal doors require different levels of security.
The selection of a cylinder is vital. It is based on the amount of use your doors and handles receive. Doors that are external, for instance, should be fitted with higher security cylinders while internal doors can be secured with an ordinary cylinder. In addition, some cylinders come with additional features that increase security even more, like anti-drill or anti-bump features.
A euro cylinder should be measured accurately to ensure it's the correct size for your door. The cylinder should be measured from the central fixing screw hole to the end of the cylinder, including the thumb turn if you have one. If you are unable measure it using the lock in its position, you can remove it. It is crucial to ensure that there is no cylindrical lock that extends beyond the handle or escutcheon. This could make it vulnerable to lock snapping attacks.
The majority of modern cylinders have been designed with bump and anti-drill features included in their design. They are designed to decrease the chances of an attack by causing the cylinder to rotate in an opposite direction. This helps prevent attacks and ensure your doors are secure.
Some cylinders are designed to withstand snapping. This is a common occurrence on cylinders. A special tool is used to break the break line of the lock and then the front of cylinder is snapped off. This is a quicker and simpler method to gain access than through a multipoint locking system. It also leaves less evidence of the break-in which could delay insurance claims.
Spring Cassette
This spring cassette sits inside the base of the door handle backplate, providing a spring solution that returns the multipoint lock handles back to their normal position after using. There was a time when handles of this kind did not have a spring integrated into them, and without it they are more likely to slide or drop once the locking mechanism is disengaged. This component is the best solution to address this issue. It also prevents your upvc door from becoming stuck in either the open or closed position as they are difficult to close manually.
The spring cassettes were made to be used with a sprung multipoint locks. They will not fit handles that aren't sprung and you'll have to cut a hole in your backplate for them to fit. (Please check the image for a more detailed diagram). They are a replacement for damaged or missing cassettes inside the backplate of the door handle for numerous kinds of uPVC doors. They have a square cut out which accommodates an 8mm spindle and are sold as a set.
These spring cassettes offer an excellent value solution for the issue of door handles that have become sagging. They are simple to install and will increase the lifespan of your uPVC door. Please contact our team for more information about our wide range of uPVC accessories and spares. We are here to help and happy to offer professional advice.